truss

What You Need To Know About Building Stage Lighting Truss Systems

What You Need To Know About Building Stage Lighting Truss Systems

  • Friday, 25 June 2021
  • 0
  • 4236
  • 0

What You Need To Know About Building Stage Lighting Truss Systems

stage moving head light

When it comes to building an aluminum stage lighting truss systems,there is something you need to know about:

Aluminium lighting truss is also called lighting truss system, stage lighting truss. Generally, it is a combination of 6061-T6 aluminum material through cutting, processing, welding, polishing, painting and other treatments. which is widely used in performances, exhibitions, event celebrations, background layout, lighting and sound hanging and other events.  it can be built into various large, medium and small lighting truss system with different specifications according to the site,  and can be flexibly combined according to specific requirements. Lightweight, easy to build and transport are the features of aluminium lighting truss, the maximum span can reach more than 30 meters, the aluminum is extremely resistant to compression, corrosion and durable. it can be divided into square, tripod and special-shaped stage lighting truss according to the shape, it can be divided into spigot type aluminium lighting truss and screw type aluminium lighting truss according to the installation category.

Steps to build aluminum stage lighting truss system:

(1) Place four aluminium lighting truss bases on the ground and adjust the lower legs to make them on a horizontal level.

(2) Insert the part under the oblique support into the outer side of the base on the four corners, insert 2 on each corner, a total of 8

(3) Fix the aluminium lighting truss hinge on the base with spigot , remember that the direction of waving of the hinge should be the same as the one marked in the design diagram

(4) Put a sleeve block on the lighting truss system hinge

(5) Connect the stage lighting truss span on the ground

(6) Connect the two ends of the stage lighting truss span to the two sleeve blocks on both sides, and then the aluminium lighting truss span is assembled on the ground.

(7) Lie down the stage lighting truss column and connect it, then connect one end to the hinge, and the other end to the lighting truss system top piece. At the same time, connect the hoist and the top piece. The function of the hoist is to lift the lower aluminium lighting truss part. 

(8) Let a person to slowly erect the stage lighting truss tower together, be careful not to push the aluminium lighting truss column to the top with too much force, and then fix the pins/screw on the hinge

(9) Tie the hook under the hoist with the lower stage lighting truss span through the sling after the towers are erected

(10) 4 people slowly pull the hoists together to pull the stage lighting truss span to the height of a guy's head 

(11) Install the lighting, sound equipment and led screens for events on the lighting truss system span

(12) 4 people pull the hanging hoist together to a predetermined height and stop

(13) Tighten one end of the diagonal support to the aluminium lighting truss column, and tighten the other end to the horizontal support of the base, and building of the aluminum stage lighting truss system is completed.

Tags: lighting truss system, aluminium lighting truss, stage lighting truss



0users like this.

Leave a Reply